194 results
The instrument measures electrical resistivity of carbon blocks, graphite, carbon paper, and related carbon products at room temperature using a constant-current source. It references ISO 11713-2000, YS/T 63.2-2005, and YS/T 64-1993 and provides automated resistivity calculation and data retrieval.
The ISPC-23 uses static loading to measure flexural strength and Young’s modulus of graphite and carbon materials at ambient temperature. It references GB 1431-2009 and YS/T 63.13-2006 and records displacement and load through computer-controlled instrumentation.
The TZY measures the dimensions and shape characteristics of wall and floor tiles, including edge straightness, squareness, and flatness, after one specimen placement. It references GB/T 3810.2-2006 and EN ISO 10545-2 and provides selectable tile ranges, digital output, and matched standard plates.
The TZY measures the dimensions and shape characteristics of wall and floor tiles, including edge straightness, right angles, and flatness, after one specimen placement. It references GB/T 3810.2-2006 and uses selectable measurement ranges and matched standard plates.
XRC-II is a thermal-properties tester for homogeneous plates, gels, powders, and granular materials under dry or moisture-conditioned states. It provides configured thermal-property measurement with embedded or control-PC operation and report output.
The GHC-II uses the method of mixtures and computerized data acquisition to measure the specific heat capacity of solid materials from room temperature to 1,400 °C. It is intended for specific-heat-capacity research and teaching applications.
The SYD hydraulic cement flexural tester measures flexural strength of concrete specimens and compressive strength of cement, mortar, red brick, and other non-metallic building materials. It uses electronic force measurement and provides selectable maximum-load options of 30 kN, 50 kN, 100 kN, 200 kN, and 300 kN; GB/T 3722 is referenced.
The CL-D determines chloride content in cement and cement raw materials using the distillation method. It is the designated equipment for the chemical-analysis method specified by JC/T 420-2007.
The RX-I Soil Resistivity Tester measures resistivity changes during water uptake and swelling of unsaturated expansive soil, wet collapse of loess, and strength development of cement soil. It uses a constant-current source, digital voltage measurement, and probe measurements to relate resistivity indicators to soil structural and mechanical-property changes.
SXZ is a sealed, protective-atmosphere box furnace for chemical analysis and physical measurements in configured atmospheres, with a stated operating range of 1200–1,700 °C. Applications include research and small-batch production involving powder metallurgy, ceramic metallization, phosphors, battery materials, electronic ceramics, and chemical raw materials.
The instrument performs sieve analysis and particle classification in laboratories serving highway, construction, geological, and metallurgical research. Each operating cycle is specified as five minutes.
The KGP tester evaluates the high-temperature tensile properties of metals, glass-fiber-reinforced cement, ceramic specimens, refractory materials, plastics, composite panels, polymeric materials, and composites with reference to GB/T 15231.4-94 and related tensile methods. Selectable test forces are 5, 10, 30, 50, 100, 150, 200, or 300 kN, with selectable test temperatures of 1,000 °C, 1,400 °C, or 1,700 °C.
The DRX-II-JH measures thermal conductivity of electrically conductive metals and nonmetals at elevated temperatures by a direct-current longitudinal heat-flow method. Supported specimen families include copper, stainless steel, graphite, and wire specimens.
The HSF-Ⅱ determines cement heat of hydration by the direct method and supports heat-of-solution testing for cement and concrete. The direct method tracks cement-mortar temperature change in an adiabatic calorimeter for seven days and reports heat of hydration in J/g under GB 2022-80 and GB/T 12959-91.
The Ceramic Water Absorption Tester measures water absorption using a vacuum container and water-circulation vacuum pump. It is used for construction and sanitary ceramics, refractory products, and piezoelectric ceramic materials under GB/T 3810.3-2016, GB/T 2997-2000, and GB/T 2413-1981.
DRH300 is a heat-flow-meter (HFM) analyzer that uses dual heat-flow sensors to measure thermal conductivity of solid and board-shaped materials. It provides configured temperature control, data acquisition, analysis, storage, and reporting with reference to ASTM C518, ISO 8301, and GB/T 10295.
The SM-200 Granule Abrasion Tester measures the abrasion rate of synthetic ceramsite filter media used in water treatment and industrial active alumina. Its test system provides programmable rotation count, speed, duration, vibration frequency, and vibration time.
The instrument is a benchtop in-situ freeze dryer with touchscreen operation and automatic freeze-drying control. It is used for food, biological products, chemicals, Chinese herbal medicines, and health products.
DRH300 is a thermal-conductivity analyzer for solid and board-shaped materials. It provides configured temperature control, data acquisition, analysis, and reporting.
XRC-II determines thermal storage coefficient, thermal conductivity, thermal diffusivity, and specific heat capacity of homogeneous plate, gel, powder, and granular materials under dry or moisture-conditioned states. It uses transient heating and temperature-response analysis with embedded or control-PC operation and report output.
The SYD hydraulic compression machine applies load for compression testing of concrete, cement, mortar, brick, and related non-metallic materials. A flexural attachment permits flexural testing of concrete specimens; selectable maximum-load options are 30 kN, 50 kN, 100 kN, 200 kN, and 300 kN, with GB/T 3722 referenced.
The SYD applies hydraulic load for compression and flexural testing of concrete, cement, mortar, brick, and related non-metallic specimens. It uses electronic force measurement and provides selectable maximum-load options of 30 kN, 50 kN, 100 kN, 200 kN, and 300 kN; GB/T 3722 is referenced.
The instrument measures electrical resistivity of graphite and carbon specimens using controlled current and voltage. The instrument references ISO 11713-2000, YS/T 63.2-2005, and YS/T 64-1993.
The WDT measures the electrical conductivity and resistivity of carbon materials, graphite blocks, and carbon paper using a regulated voltage/current source with automatic current and voltage display. At room temperature, it is used to determine the resistivity of cathode blocks, prebaked anodes, anode and cathode pastes, and other carbon products with reference to ISO 11713-2000, YS/T 63.2-2005, and YS/T 64-1993.
The Digital Glass Vertical Axis Deviation Tester measures vertical-axis deviation in glass bottles according to GB 8452-2008. It is used for beer, beverage, and pharmaceutical bottles in glass-container quality control.
The instrument measures the base and wall thickness of glass containers and bottles by digital display and encoded sensor measurement. It is specified for beer and beverage bottles, plastic bottles, and pharmaceutical ampoule, oral-liquid, antibiotic, and infusion bottles.
The SWY-I measures internal stress in glass and optical materials by polarized-light interference and quarter-wave compensation, with qualitative and quantitative methods. It references GB/T 4545 and provides automatic display and print output.
The XPD-06D tester measures the linear coefficient of thermal expansion of concrete and can also test asphalt using a differential resistance strain gauge and a constant-temperature water tank. It accepts laboratory-molded specimens and field-drilled cores for engineering quality inspection, teaching, and research.
The GXT glass crystallization test furnace uses the gradient furnace method to determine the crystallization temperature range, upper and lower limits, and degree of crystallization in glass. It is used to test glass, gemstones, and other non-metallic materials in factory, school, and research laboratories.
The DTM-II Dynamic Elastic Modulus Tester determines dynamic elastic modulus from material resonance frequency measured by impact excitation and frequency analysis. It is used for concrete, carbon, glass, brick, plastic, metal, and other nonmetallic materials in construction and related laboratories.