Showing 11 of 194
The KXT4742 tests the durability of sanitary ceramic toilet seats and covers by applying load with a compressed-air cylinder piston. It performs opening/closing, slow-fall, strong-pressure, impact, swing, and static-load tests under the cited toilet-seat and cover standards.
The DF1004 tests water-seal stability of water-seal floor drains by applying and holding a controlled vacuum. It references GB/T 27710-2011 and provides vacuum display, setpoint control, pressure holding, and a single test station.
The TCS-II tests flush performance of sanitary ceramic ware and flush valves with a variable-frequency constant-pressure water-supply system. It references GB/T 26750-2011, GB 6952-2015, and JC/T 931-2003 and records pressure, flow, time, flush curves, and test media results.
The CHT-II assesses the load resistance of sanitary ceramic products by applying adjustable loads with a pneumatic cylinder and piston. It is designed with reference to GB/T 6952-2005 (Sanitary ceramics) and GB 26730-2011 (Gravity-flush devices and sanitary-ware frames).
The instrument tests crazing resistance of sanitary ceramic ware using controlled hot- and cold-water baths. It references GB/T 6952-2015 and provides nickel-chromium heating, compressor cooling, circulation, automatic temperature control, and automatic stop at test completion.
The BZS-II tests siphon action, water hammer, flow, and sealing of gravity flush devices for sanitary ceramic ware and toilets. It references GB/T 26730-2011, ASSE 1002-2018, EN 14142-2018, EN 14055-2018, AS 172.2-2018, and ASME A112.18.1-2018.
The instrument tests hot-and-cold shock resistance of sanitary ceramic ware with touchscreen automatic control. It is specified for AS 3588-1996, EN 14688-2015, EN 14516-2006, and EN 13310-2015 and provides separate controlled cold- and hot-water circuits.
The instrument tests pressure resistance, sealing performance, and anti-overflow performance of floor drains under GB/T 27710-2011. It uses motorized loading, electronic force measurement, pressure holding, and a single test station.
The WZ1001 tests sanitary-ware and floor-drain flow and the self-cleaning capability of water-seal floor drains. It references GB/T 26712-2011 and GB/T 27710-2011 and uses a pump, flow meter, and automatic water-level control.
The instrument tests the thermal-cycling resistance of sanitary hoses under GB/T 23448-2009. It applies adjustable pressure and constant-flow water at 20 °C and 70 °C for at least 300 cycles.
The WL1003 tests the flow of angle valves for sanitary ware and heating systems with reference to GB/T 26712-2011. It provides specified flow and pressure ranges with a three-phase, four-wire electrical supply.