194 results
The SJY-I-10/14 glass annealing apparatus determines the annealing temperature of glass using a high-purity alumina-tube resistance furnace. It is intended for glass research and teaching and also supports polarization experiments.
The instrument series rapid box furnace uses new materials and programmable heating, with an adjustable heating rate of 0–100 °C/min. Selectable furnace temperatures are 1,000 °C, 1,400 °C, and 1,600 °C, with listed chamber sizes and an empty-chamber heating time to 1,400 °C of no more than 20 minutes.
SQW-II-14 is a high-temperature materials test system for thermal expansion, high-temperature compressive strength, expansion force, deformation under constant load, residual strength, and room-temperature compressive strength. It is intended for inorganic nonmetallic materials and molding mixtures, with normal furnace operation to 1,350 °C and short-term operation to 1,400 °C.
The instrument measures dynamic elastic modulus, resonance frequency, damping, and internal friction using impact excitation and resonance analysis. It is configured for concrete, carbon, plastics, glass, brick, stone, metals, and other construction and engineering materials.
SG-XX-YY is a configurable horizontal tube furnace for vacuum heating and protective-atmosphere heating, with selectable power, tube dimensions, rated temperature, heating elements, and gas systems. It provides programmable heating from room temperature to 1,600 °C, PID control, adjustable gas flow, and multiple vacuum configurations.
The KM rapid grinder is a laboratory sample-preparation device with selectable single-head, double-head, or multiple-head configurations. It accepts grinding quantities of 0.5 kg or 1 kg and allows the grinding time to be set as required.
The SG2 Crucible Resistance Furnace automatically controls crucible heating for melting tests of ceramic, glass, enamel-abrasive, inorganic-pigment, alloy, and composite materials. Selectable crucible capacities are 1,000 mL and 2,000 mL, with selectable maximum temperatures of 1,000 °C, 1,200 °C, 1,350 °C, or 1,600 °C.
DRH300 is a heat-flow-meter (HFM) analyzer using dual heat-flow sensors to measure thermal conductivity of insulation and board-shaped materials. It provides configured temperature control, data acquisition, analysis, and reporting.
UKW-500 is a resistance-heated sintering furnace for laboratory and industrial thermal processing. It is presented as a configuration overview; obtain a verified model-specific datasheet before selecting the temperature range, chamber dimensions, load capacity, electrical supply, exhaust system, or door arrangement.
The LWL asphalt bending beam rheometer measures the flexural creep stiffness or compliance of asphalt binders using the AASHTO T 313-04 bending-beam rheometer method. It is intended for low-temperature testing of unaged binders and binders conditioned by RTFOT (AASHTO T 240) and/or PAV (AASHTO R 28).
The GHR-3K measures thermal conductivity and heat transfer coefficient of circular-pipe specimens using a guarded measurement section, controlled heating, and computer data acquisition. It references GB 10296-2008 and ISO/DIS 8497 as test methods and uses a fixture designed for the pipe size.
The instrument measures dielectric loss tangent (tanδ) and dielectric constant (ε) in electrical ceramics, device ceramics, and capacitor ceramics. It references GB/T 5594.4-1985 and provides frequency, Q-value, inductance, and specimen-dimension measurements for inorganic non-metallic materials research.
SJY-II-14/17 is a high-temperature transmission-imaging analyzer for sintering-point temperature, refractoriness, and surface contact angle. It is used with molding sands, mixtures, refractory materials, ceramic raw materials, and metallic materials.
The instrument measures the linear expansion of aluminum cathode bottom carbon blocks caused by sodium infiltration, in accordance with ISO 15379-1:2004 and YS/T 63.5-2006. The integrated instrument controls displacement and temperature throughout the test and includes an embedded touchscreen with optional desktop-computer connection.